DESCRIPTION
The STLC2411 offers a compact and complete solution for short-range wireless connectivity. It incorporates all the lower layer functions of the Bluetooth™ protocol. The microcontroller allows the support of all data packets of Bluetooth™ in addition to voice. The embedded controller can be used to run the Bluetooth™ protocol and application layers if required. The software is located in an external memory accessed through the external memory interface.

FEATURES
■ Pin to pin compatible with the previous version STLC2410B
■ Ericsson Technology Licensing Baseband Core (EBC)
■ Bluetooth™ specification compliance: V1.1 and V1.2
■ Point-to-point, point-to-multi-point (up to 7 slaves) and scatternet capability
■ Asynchronous Connection Oriented (logical transport) link
■ Synchronous Connection Oriented (SCO) links: 2 simultaneous SCO channels
■ Supports Pitch-Period Error Concealment (PPEC)
   – Improves speech quality in the vicinity of interference
   – Improves coexistence with WLAN
   – Works at receiver, no Bluetooth implication
■ Adaptive Frequency Hopping (AFH): hopping kernel, channel assessment as Master and as Slave
■ Faster Connection: Interlaced scan for Page and Inquiry scan, first FHS without random backoff, RSSI used to limit range
■ Extended SCO (eSCO) links
■ Standard BlueRF bus interface
■ QoS Flush
■ Clock support
   – System clock input: any integer value from 12 … 33 MHz
   – LPO clock input at 3.2 and 32 kHz or via the embedded 32 kHz crystal oscillator cell
■ ARM7TDMI 32-bit CPU
■ Memory organization
   – 64KByte on-chip RAM
   – 4KByte on-chip boot ROM
   – Programmable external memory interface (EMI)
   – Supports byte and half word access
   – Supports up to 3 external RAM banks (1 Mbyte/ bank)
   – Supports up to 2 Mbyte external flash memory
■ Low power architecture with 2 different low power levels:
   – Sleep Mode
   – Deep Sleep Mode
■ HW support for packet types
   – ACL: DM1, 3, 5 and DH1, 3, 5
   – SCO: HV1, 3 and DV
   – eSCO: EV3, 5
■ Communication interfaces
   – Synchronous Serial Interface, supporting up to 32 bit data and different industry standards
   – Two enhanced 16550 UARTs with 128 byte FIFO depth
   – 12Mbps USB interface
   – Fast master I2C bus interface
   – Multi slot PCM interface
   – 16 programmable GPIOs
   – 2 external interrupts and various interrupt possibilities through other interfaces
■ Ciphering support for up to 128-bit key
■ Efficient support for WLAN coexistence in collocated scenario
■ Receiver Signal Strength Indication (RSSI) support for power-controlled links
■ Separate control for external power amplifier (PA) for class1 power support.
■ Software support
   – Low level (up to HCI) stack or embedded stack with profiles
   – Support of UART and USB HCI transport layers
■ Compliant to automotive specification AEC-Q100

Applications Features
Typical applications in which the STLC2411 can be used are:
■ Portable computers, PDA
■ Modems
■ Handheld data transfer devices
■ Cameras
■ Computer peripherals
■ Other type of devices that require the wireless communication provided by Bluetooth™
■ Cable replacement