FRS-R-10
AI

The **FRS-R-10** is a specific model of high-performance industrial fuse manufactured by **Bussmann (Eaton)**. It belongs to the **Fusetron™** series and is widely used in electrical systems for motor protection and general-purpose circuit shielding.
---
## 1. Technical Specifications
The following table outlines the key electrical characteristics of the FRS-R-10:
| Feature | Specification |
| :--- | :--- |
| **Model Number** | FRS-R-10 |
| **Amperage Rating** | 10 Amps |
| **Voltage Rating (AC)** | 600 Vac |
| **Voltage Rating (DC)** | 300 Vdc |
| **Interrupting Rating** | 200,000A RMS Symmetrical (AC) / 20,000A (DC) |
| **Fuse Class** | Class RK5 |
| **Type** | Dual-Element, Time-Delay |
| **Body Material** | Fiberglass Tube |
---
## 2. Key Electronic Features
### A. Dual-Element Construction
Unlike a standard fast-acting fuse, the FRS-R-10 has two distinct components:
1. **Thermal Element:** Handles low-level overloads. It is designed to tolerate temporary surges (like motor startups) without blowing.
2. **Magnetic Element:** Handles short circuits. It reacts almost instantaneously to high-current faults to prevent fire or equipment damage.
### B. Time-Delay Function
This is the most critical feature for "inductive" loads. When an electric motor starts, it draws a current significantly higher than its operating current (inrush current). The FRS-R-10 is engineered to wait (delay) for a specific duration to see if the surge subsides. If the high current persists, it opens the circuit.
### C. Current Limitation
The FRS-R-10 is "current-limiting." This means in the event of a massive short circuit, the fuse clears the fault so fast that it prevents the current from ever reaching its full peak potential, protecting downstream components from mechanical stress and heat.
---
## 3. Physical Dimensions (Class RK5)
The physical size is standardized to ensure it fits into specific fuse blocks:
* **Length:** 5.0 inches (127 mm)
* **Diameter:** 0.81 inches (20.6 mm)
---
## 4. Typical Applications
* **Motor Control Centers:** Provides "Type 2" protection for motor starters.
* **Transformers:** Protects against secondary short circuits.
* **General Feeder Circuits:** Used in industrial panels where 600V protection is required.
* **Branch Circuit Protection:** Ensuring individual equipment doesn't cause a total system failure.
- ⤷
What is the difference between an RK1 and an RK5 fuse like the FRS-R-10?
- ⤷ Can the FRS-R-10 be used in a 240V circuit instead of 600V?
- ⤷ How do you test if an FRS-R-10 fuse is blown using a multimeter?