ATmega169P datasheet(224/393 Pages) ATMEL

No de pièce	ATmega169P

Description	8-bit Microcontroller with 16K Bytes In-System Programmable Flash

PDF	393 Pages

Scroll/Zoom	100%

Fabricant	ATMEL [ATMEL Corporation]

Site Internet	http://www.atmel.com

Logo

224 / 393 page

224

8018N–AVR–08/09

ATmega169P

22.7.3

ADC Accuracy Definitions

An n-bit single-ended ADC converts a voltage linearly between GND and V

REF in 2

n steps

(LSBs). The lowest code is read as 0, and the highest code is read as 2

n-1.

Several parameters describe the deviation from the ideal behavior:

• Offset: The deviation of the first transition (0x000 to 0x001) compared to the ideal transition (at

0.5 LSB). Ideal value: 0 LSB.

Figure 22-10. Offset Error

• Gain Error: After adjusting for offset, the Gain Error is found as the deviation of the last

transition (0x3FE to 0x3FF) compared to the ideal transition (at 1.5 LSB below maximum).

Ideal value: 0 LSB

Figure 22-11. Gain Error

• Integral Non-linearity (INL): After adjusting for offset and gain error, the INL is the maximum

deviation of an actual transition compared to an ideal transition for any code. Ideal value: 0

LSB.

Output Code

VREF Input Voltage

Ideal ADC

Actual ADC

Offset

Error

Output Code

VREF Input Voltage

Ideal ADC

Actual ADC

Gain

Error

ATmega169P Fiches technique(PDF) 224 Page - ATMEL Corporation