Description The M16C/30L group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 100-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, low voltage (2.2V to 3.6V), they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications. The M16C/30L group includes a wide range of products with different internal memory sizes and various package types. Features • Memory capacity..................................ROM (See Figure 1.1.4. ROM Expansion) RAM 2K to 3K bytes • Shortest instruction execution time ......62.5ns (f(XIN)=16MHZ, VCC=3.0V to 3.6V) 142.9ns (f(XIN)=7MHZ, VCC=2.4V to 3.6V without software wait) • Supply voltage .....................................3.0V to 3.6V (f(XIN)=16MHZ, without software wait) 2.4V to 3.6V (f(XIN)=7MHZ, without software wait) 2.2V to 3.6V (f(XIN)=7MHZ, with software one-wait) • Low power consumption ......................34.0mW (VCC = 3V, f(XIN)=10MHZ, without software wait) 66.0mW (VCC = 3.3V, f(XIN)=16MHZ, without software wait) • Interrupts..............................................16 internal and 5 external interrupt sources, 4 software interrupt sources; 7 levels (including key input interrupt) • Multifunction 16-bit timer......................3 output timers + 2 input timers • Serial I/O ..............................................3 channels (3 for UART or clock synchronous) • DMAC ..................................................1 channels (trigger: 14 sources) • A-D converter.......................................10 bits X 8 channels (Expandable up to 10 channels) • Watchdog timer....................................1 line • Programmable I/O port ........................87 lines • Input port..............................................1 line (P85 shared with NMI pin) • Memory expansion ..............................Available (to a maximum of 1M bytes) • Chip select output ................................4 lines • Clock generating circuit .......................2 built-in clock generation circuits (built-in feedback resistor, and external ceramic or quartz oscillator) Applications Audio, cameras, office equipment, communications equipment, portable equipment
|