Military COTS DC/DC Converters The MilQor series of MIL COTS DC/DC converters brings SynQor’s field proven high-efficiency synchronous rectification technology to the Military/Aerospace industry. SynQor’s ruggedized encased packaging approach ensures survivability in demanding environments. Compatible with the industry standard format, these converters operate at a fixed frequency, and follow conservative component derating guidelines. They are designed and manufactured to comply with a wide range of military standards Operational Features • High efficiency, 90% at full rated load current • Operating input voltage range: 16-40 V • Fixed frequency switching provides predictable EMI • No minimum load requirement Mechanical Features • Industry standard quarter-brick pin-out configuration • Size: 1.54" x 2.39" x 0.50" (39.0 x 60.6 x 12.7mm) • Total weight: 3 oz (85 g) Control Features • On/Off control referenced to input side • Remote sense for the output voltage • Output voltage trim range of -20%, +10% Safety Features • 2250 V, 30 MW input-to-output isolation • Certified 60950-1 requirements for basic insulation (see Standards and Qualifications page) • CE Marked • RoHS compliant Protection Features • Input under-voltage lockout • Output current limit and short circuit protection • Active back bias limit • Output over-voltage protection • Thermal shutdown
|