Description The M16C/62A (80-pin version) group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 80-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications. The M16C/62A (80-pin version) group includes a wide range of products with different internal memory types and sizes and various package types. Features • Memory capacity..................................ROM (See Figure 1.1.3. ROM Expansion) RAM 3K to 20K bytes • Shortest instruction execution time ......62.5ns (f(XIN)=16MHZ, VCC=5V) 100ns (f(XIN)=10MHZ, VCC=3V, with software one-wait) : Mask ROM, flash memory 5V version • Supply voltage .....................................4.2V to 5.5V (f(XIN)=16MHZ, without software wait) : Mask ROM, flash memory 5V version 2.7V to 5.5V (f(XIN)=10MHZ with software one-wait) : Mask ROM, flash memory 5V version • Low power consumption ......................25.5mW ( f(XIN)=10MHZ, with software one-wait, VCC = 3V) • Interrupts..............................................25 internal and 5 external interrupt sources, 4 software interrupt sources; 7 levels (including key input interrupt) • Multifunction 16-bit timer......................5 output timers + 6 input timers (3 for timer function only) • Serial I/O ..............................................5 channels (2 for UART or clock synchronous, 1 for UART, 2 for clock synchronous) • DMAC ..................................................2 channels (trigger: 24 sources) • A-D converter.......................................10 bits X 8 channels (Expandable up to 10 channels) • D-A converter.......................................8 bits X 2 channels • CRC calculation circuit.........................1 circuit • Watchdog timer....................................1 line • Programmable I/O ...............................70 lines • Input port..............................................1 line (P85 shared with NMI pin) • Clock generating circuit .......................2 built-in clock generation circuits (built-in feedback resistor, and external ceramic or quartz oscillator) Note: Memory expansion mode and microprocessor mode are not supported. Applications Audio, cameras, office equipment, communications equipment, portable equipment
|